Common Problems in Wire Harness Processing and Their Solutions

In the wiring harness processing often encounter a variety of problems, this, for everyone to sort out some of the wiring harness processing problems and their solutions:

1, wear plastic shell when the terminal off PIN

In the plastic shell when the terminal will often occur when the PIN off the case, then how do we solve it? In fact, only need to insert into a hole when there is a pull back the action on it.

2, wire stained with tin

Once the wire is stained with tin, it may cause the PVC to heat up. Encountered such a situation, to choose the temperature of the PVC, and to control the time to dip tin not too long.

3, how to do CABLE line reliability test

Generally need to do swing, lifting and conduction performance testing and so on. General swing test conditions: swing frequency, lifting load and the minimum number of swing requirements and so on parameters. The conditions for the lifting test should be: the load of the lifting load, the time of hoisting, and the displacement of the weight after the lifting of the three parameters.