How to Achieve Branch Wire Assignment Combination Function

According to the information provided can be correctly drawn with a single figure, for the middle stripping single with. However, for complex segmented single-matching (such as ultrasonic welding), the main line needs to be cut from a single point to two loops. The system automatically generates the number of the new loop. If there is more than one single point on a main line, Create a new circuit number from a single point of cut. The new circuit number, the left end of the first paragraph and the right end of the last paragraph are crimped before shearing the main line of the left and right joints, the other end of the single distribution; the rest of the circuit number of the two ends of the previous paragraph and after a single .

X-rays were found to sensitize the photographic film. People think that radiation damage to the polymer material, the history of automotive wiring harness can be traced back to late last century. It was not until the 1950s when irradiation was found to crosslink polyolefins and subsequent grafting of certain monomers onto the polymer by irradiation was rapidly developed for use in polymeric materials. There are two main sources of irradiation used in irradiation technology: one is a natural or artificial radioactive source and the other is a variety of different types of accelerators. The former is widely used as a radiation source and cesium 137 strontium 90; the latter such as X-ray tube, linear accelerator, cyclotron and other high-energy devices

And then trigger a variety of chemical reactions, the principle of action are excited by high-energy radiation polymer molecules and cause ionization; positive and negative ions decomposition; charge neutralization. Especially free radical reaction. As the irradiation technology on the material morphology, irradiation conditions no special requirements, irradiation control easy to control (can accurately control the degree of crosslinking) uniform irradiation, good reproducibility. The product is of high purity and can be used for the continuous production of wire and beam. Therefore, it is considered as a new processing technology with high production efficiency, energy-saving and labor-saving, low-cost technology and high efficiency, pollution-free or less pollution. In addition, automotive wire harness technology also applies to some of the chemical methods can not be cross-linked materials such as PVCPP, etc., and has a complex structure of the insulation and sheathing has constituted a serious challenge to the organic peroxide cross-linking technology.