RCCN WeChat QrCode
Mobile WebSiteHarnesses are used to ensure that electrical equipment is working properly, especially in harsh environments, especially wiring harnesses. The wiring harness consists of several parts, including terminal blocks, insulating covers and other components. It is necessary to pay attention to the right materials. In order to ensure the quality of the processed wire harness products, quality problems and long-term use will not occur in the later stages.
Before the wire harness is processed, it is necessary to check whether the processing machine can work normally, and it is necessary to ensure that there is no interference on the working surface to avoid interference after-treatment, and it is necessary to determine the specification and color of the wire harness before processing, and set it in advance. The parameters are fully prepared for the job and then processed.
During processing, you must ensure that the device is properly debugged. It can be tested first to ensure the pass rate of the processed product and the equipment needs to be tested regularly. If there is a problem, it needs to be repaired in time for post-processing. The raw materials of the wire harness need to be placed to ensure that the mold does not contain impurities, so as not to affect the quality of the finished wire harness.
For wire harness processing personnel, they also need to have some experience and need to be proficient in operation before they can formally go to work. Only then will you know how to operate the instrument and place the material without affecting the efficiency and quality of the process, as well as problems during processing. It can be checked and resolved in time to ensure fast and normal processing.
After the wire harness processing is completed, the quality and shape of the processed wire harness needs to be checked to avoid damage or breakage of the wire core. It is necessary to ensure that the quality of the wire harness products produced is acceptable, that they do not leave the factory unqualified products, and that the reputation of the manufacturer and reputation will have an impact.
In the entire workflow of the processing harness, it is necessary to ensure correct operation, strict inspection of the product conforming to the standard, and there are many processes in the wire processing. After completing any process, you need to check the product to make sure it goes through the next step.
