RCCN WeChat QrCode
Mobile WebSiteThe wire harness is equivalent to the blood vessels of the vehicle and is accurately connected to the various accessories, so that the entire vehicle can operate safely. There is a strict and correct process for the processing of forklift harnesses, which will determine the quality of the wire harness processing, so every step of the process must be taken care of and meticulous. Here is how the basic process of wire harness processing of Shanghai Richeng Electronics Co., Ltd. is displayed? Let everyone know more about wire processing.
2. Place the qualified wire on the transfer wire frame and feed the wire. At this time, you should pay attention to avoid scratching the surface of the wire.
Third, the line is cut; at this time, the wire cutting machine is used to cut the wire into the required length.
Fourth, peeling: According to the sop requirements for insulation skin, mainly using pneumatic peeling machine
5. Twisting line: Finishing and twisting the conductor at the joint. Mainly using a twisting machine.
6. Riveting: Use the terminal machine to rive the conductor and plug terminal at the joint.
7. Assembly: The assembled wire harness is assembled, mainly by assembling a plastic plug housing.
Eight, test, the final test of the product, after the qualification can be packaged.
