RCCN WeChat QrCode
Mobile WebSite1."One millimeter" is a considerable scale in the machinery industry, even in the entire manufacturing industry. If you see an ad like "accurate to the millimeter" on TV someday, remember to blacken the company.
2.Chrome (ge), the general learning of machinery is known to read du\\\\\\'ge, because reading du\\\\\\'luo can not be used in pinyin. But the daily use is still du\\\\\\'luo, because it is to distinguish between chromium and cadmium.
3.Qui fire, the daily spoken language in the industry generally uses "bonfire" because it is to distinguish from "annealing". In the steel mill workshop, the sound is noisy, it is difficult to distinguish between quenching and annealing. As for why this pronunciation is called, it is actually related to the actual operation of quenching. In fact, it is called "bonfire" when taking hot objects, so some people say that it is changed because of avoiding "crunchy".
4."Light" refers to "fine" and "last time." For example, "light knife" refers to "the knife of the fine car", and "light knife" refers to the "last knife of the fine car." The scope of "light" can be too wide, "fine grinding", "finishing", "fine car", etc., generally refers to the last time, requiring higher precision. “Lighting”, finishing the surface of the workpiece to improve its smoothness.
5.The name of rough processing in the north and south is different. The south is called “opening up”; the north is called “raising”.
6.Pick thread, pick: thread.
7.Buckle: Tie thread.
8.Stirring: tempering.
9.Tip (sào): taper, slope, refers to the workpiece is big and small, the average person has read into [ shāo ].
10.Park: The accuracy of the shape and position is unqualified, such as the unevenness of the board, the disc is not round, the swing is swung, and the coaxiality is not good.
11.Purple (pronounced shai): The paint used by the fitter to smear the surface of the workpiece to facilitate scribing.
12.Le knife: Because of the deformation of the extrusion, the tool can not be cut by plastic deformation, generally refers to the milling cutter.
13.Knife: The tool is cracked and broken.
14. (Watt) knife: The tool is inserted into the workpiece to make the workpiece defective.
15.Le: High-speed finishing with carbide tools, because the cutting at this time is extrusion processing, so called Le, generally speaking, it is just a verb, before and after the appropriate language environment, such as: this alloy The knife will be light.
16.Road: 0.01 mm, northeast.
17.Silk: 0.01 mm, south.
18.One: mm, for example, 10 millimeters is called 10, for example: there are still 10 volumes for this activity.
19.Milling: Reamer, but it seems to be less.
20.Wind milling machine: Rotary cutter similar to milling cutter installed on the wind grinding wheel, used for fitter.
twenty one.
Curved feet: square.
twenty two.
Pliers: The meaning of the language is broad, to see who to say, and to understand each other, often mistakes when borrowing things. For example, the vise, as long as there are clamps, the fitter does not count.
twenty three.
Wind bag: air pressure capacity, looks a bit like a gas tank.
twenty four.
Shake: Hand cranking, such as hand wheel.
25.Km wrench: torque wrench.
26.Card Barrier: A thing used to fasten a stack of thin iron plates together. It functions like a vise, shaped like a d, and the vertical is a screw.
27.Shell: chipbreaker.
28.Open shell (Qiao four sounds): Turning tool grinding chip breaker.
29.Catch up: focus on a 'catch' word. Hand-eye closed-loop servo, 2-axis linkage, two-step stepping, "man-controlled" machine tool shakes the handwheel with both hands, controls the speed of each slide, and processes more complicated shapes. General lathe Depending on the sense of space and the model, the milling machine relies on the line of the fitter. The master can control the error within 20 channels, and the powerful gold miller can even process the two axes.
30.Outer circle: The outer circle of the car. The outer circle of the rough car's hair is also called the black skin.
31.End plane: the plane of the car.
32.Taper: Wire tapping (different pronunciation).
33.Bake (bei) burn pass through to read as (pei) burn. "Roasting" refers to a heating process in which iron ore is heated to a temperature 200 to 300 ° C lower than its melting temperature. By such heating, the iron ore undergoes a chemical change in a solid state to improve its metallurgical properties.
34.Dip (jin) out to be dip (qin) out. For example, the blast furnace slag of steel plant is used as raw material, and the rate of iron and aluminum immersion (qin) is studied by acid leaching method and assisted immersion method. In fact, leaching is a commonly used process in wet smelting. Whether it is iron or copper, zinc or gold, the extraction process is used. Generally, the elderly are not reading (jin).
35.The slab (pi) is often read as a slab (pei). The pei is a product obtained by casting a molten steel made from a steelmaking furnace through a continuous casting machine. It is not a finished product and needs to be rolled to become a steel. Of course, the mainland reads both the slab (pi) and the pei (pei), while Taiwan reads the pei.
36.Rolling (zha steel) should not be read as pressure (ya) steel. The words “rolling” that have not been exposed to the steel industry are often found in the words “rolling (ya) road”, “rolling (ya) system” and “rolling (ya)”, but once in the metallurgical industry, the word Read (zha), such as common rolls, steel rolling, rolling mills, etc.
