Characteristics of nylon cable joints
1. Nylon cable has high mechanical strength, good resistance and high tensile and compressive strength. The specific tensile strength is higher than that of metal, which is comparable to that of metal, but its rigidity is not as good as that of metal. The tensile strength is close to the yield strength and is more than twice as high as ABS. The absorption of impact and stress oscillations is strong, the impact strength is much higher than that of ordinary plastics, and it is superior to acetal resins.
2. The fatigue resistance of the nylon cable is outstanding, and the workpiece can still maintain the original mechanical strength after repeated repeated inflection. PA is often used in occasions where the regular escalator handrails, new bicycle plastic rims, etc. are extremely significant.
3. Nylon cable has high softening point and heat resistance (such as nylon 46, high crystalline nylon has high heat distortion temperature and can be used for a long time at 150 degrees. PA66 is strengthened by glass fiber, and its heat distortion temperature reaches 250 degrees or more. ).
4. The nylon cable is externally lubricated with a small coefficient of conflict and wear resistance. It is self-lubricating when moving mechanical components, low noise, and can be used without lubricant when the conflict effect is not too high; if it is necessary to use lubricant to reduce conflict or assist heat dissipation, water oil, grease and the like can be selected. Then, as a transmission component, its service life is long.
5. Nylon cable Corrosion resistant, very resistant to alkali and most salt liquid, also resistant to weak acid, oil, gasoline, aromatic hydrocarbon-like compounds and general solvents, lazy to aromatic compounds, but not resistant to strong acids and oxidants. It can withstand the corrosion of gasoline, oil, fat, alcohol, weak cockroaches, etc. and has good anti-aging ability. It can be used as packaging materials for lubricating oil, fuel, etc.
6. Nylon cable has self-extinguishing property, non-toxic, odorless, good weather resistance, lazy to biological corrosion, and excellent antibacterial and anti-mildew ability.
7.. Nylon cable has excellent electrical functions. The electrical insulation is good. The nylon has high volume resistance and high breakdown voltage. In the dry environment, it can be used as a power frequency insulation material, and it has good electrical insulation even in high humidity environment.
8. Nylon cable parts are light in weight, easy to dye, and easy to form. It can move quickly due to its low melt viscosity. It is easy to mold, and has a high freezing point after filling. It can be quickly shaped, so the molding cycle is short and the production efficiency is high.
Related articles
-
Cable gland - what causes the insulation to decrease
Factors that cause insulation degradation 1> Insulation is damp. This condition is also common and generally occurs at cable joints in direct buried or drained pipes. For example, if the cable
-
Nylon cable connector - precautions when using
Nylon cable joints can be applied to the environment with water, providing a safe and reliable connection. The most important thing is to achieve waterproofing. Then the waterproof cable joints must b
-
How to use nylon cable joints
Nylon cable waterproof joints are an accessory for cables and are mainly used in distribution boxes and power distribution cabinets.1. The connector can lock the cable, and the other end can be connec
-
Two tips for cable waterproof joints
Nylon cable waterproof joints use stainless steel as a raw material, which can be said to have great advantages in all aspects of manufacturing, operation or processing. Therefore, although the waterp
-
Metal hose, increase knowledge!
Nylon cable waterproof joints use stainless steel as a raw material, which can be said to have great advantages in all aspects of manufacturing, operation or processing. Therefore, although the waterp
-
Characteristics of nylon cable joints
Characteristics of nylon cable joints:1. Nylon cable has high mechanical strength, good resistance and high tensile and compressive strength. The specific tensile strength is higher than that of metal
-
The classification of injection molds, the most detailed introduction!
Classification of injection molds(1) Single-part molding injection moldWhen the mold is opened, the movable mold and the fixed mold are separated, thereby taking out the plastic part, which is called