Whenever the rainy season, there are basically cases where the car is blistered. For a traditional fuel car, if it is blistered, it will damage the engine or even be scrapped if it is serious. How to check for a pure electric car after it is soaked? The waterproof performance of pure electric vehicles has reached the waterproof standard of IP6 and 7. Although it has strict waterproof standards, after serious water soaking, it is also necessary to carry out a series of inspections for vehicles to avoid safety hazards when the vehicles are used. .

Electric vehicles are most afraid of water and electrical components. After severe watering, the first thing is to prohibit starting the vehicle. Once started, the line will not be in good contact, avoiding internal short-circuit and burning, causing serious accidents. For the inspection of electrical appliances, also pay attention to the inspection of power batteries, motors and power harnesses. A dedicated detector can be used to read the vehicle's electrical and sensor and battery data to determine the status of its operation.

If the electric vehicle is blistered over the chassis, it should be thoroughly inspected. The body and chassis should be cleaned and ventilated and dried in a timely manner. In addition, the chassis can be rust-proofed to reduce the chassis. The chance of rusting. Also check the water intake of the front engine room. If there is any flooding, it should be dealt with in time to prevent further damage. In the end, the water tanker should be handed over to the professional personnel, and the professional battery should be used for the power battery. Check the motor and power harness.

In general, after the electric vehicle is seriously soaked in water, it is recommended that the vehicle should be inspected in time after the rain. It is also possible to protect the paint surface by waxing, coating, sealing, and plating. The maintenance items are handed over to the professionals when it comes to electrical and electronic components.