Wiring duct,Cable Gland,Cable Tie,Terminals,RCCN

Conductor connection Conductor connection requires low resistance and sufficient mechanical strength, and no sharp corners should appear at the connection. The connection of medium and low voltage cable conductors is usually crimping. Pay attention to crimping:

(1) Select a conductor connecting tube with appropriate conductivity and mechanical strength;

(2) The fit clearance between the inner diameter of the crimp tube and the outer diameter of the connected core is 0.8 to 1.4 mm;

(3) The resistance value of the joint after crimping should not be greater than 1.2 times of the conductor of equal section, and the tensile strength of the copper conductor joint is not less than 60N / mm2;

(4) Before crimping, the outer surface of the conductor and the inner surface of the connecting pipe are coated with conductive glue, and the oxide film is destroyed with a wire brush;

(5) Sharpened corners, burrs, etc. on the connecting pipe and the core conductor should be smoothed with a file or sandpaper.