The first new-generation fast switching fault current-limiting device used in the 750 kV power grid was officially connected to the grid for trial operation
Date:2021-12-22 origin:Power grid headlines Visit:7307
The load and grid structure of the Northwest Power Grid present the characteristics of “overall dispersion and partial concentration”. The rapid looping of the 750 kV power grid greatly shortens the electrical distance between the load centers, and the centralized development of large DC and large energy bases doubles the installed capacity in the near area Increase, the problem of short-circuit current exceeding the standard is prominent. Temporary measures such as optimizing the startup mode, changing the network topology by optimizing the startup mode, connecting the line or pulling and stopping the components, are likely to cause problems such as decreased reliability and increased power supply guarantee pressure. To this end, the Northwest Division of State Grid has carried out exploration and practical work from multiple perspectives such as feature recognition, operation control, and new technology application. It actively cooperates with State Grid Ningxia Electric Power in joint research and continuous innovation, and conducts network trials in accordance with the company’s new technologies (products). Operation management requirements, take the lead in researching and developing a fast switching fault current limiting device that is applied to the 750 kV power grid on a trial basis. At the same time, as one of the series of tests to verify the characteristics of the new energy grid system with a high proportion of the Northwest Power Grid, the action performance and control effect of the new generation of grid structure parameter flexible control technology equipment are carried out by carrying out the live test and the short circuit test. The systematic verification has also opened up new methods and new ideas for short-circuit current limiting measures.
In the next step, the Northwest Division of State Grid will continue to organize the trial operation of equipment connected to the grid, and continue to accumulate operating data and experience to ensure the safe and stable operation of the power grid and equipment. At the same time, take the initiative to take advantage of the location and power grid in the northwest, and actively pilot the application of new equipment and new technologies such as voltage source energy storage and grid-type wind turbines to contribute dispatching wisdom and strength to the construction of the "five-type" power grid in the northwest.
Related articles
-
线槽的作用及叫法
线槽的作用及叫法
-
2009第四届中国(上海)国际母线线槽及桥架工业展览会
金属线槽、镀锡母线槽、铝合金母线槽、钢外壳母线槽、组合式线槽、防碾压踩踏线槽 、机械设备配电线槽、电话线槽、PVC线槽、地板线槽、插接母线线槽、微动力及照明母线槽、高中低压电流空气式绝缘插接母线槽、带散热片密集型绝缘插接式线槽、全封闭树脂浇注母线槽(防水、防火、防腐母线槽)、共箱高低压母线槽及轨道交通专用线槽等周边相关加工配套产品。
-
线槽规格和品种以及线缆的敷设
线槽规格和品种以及线缆的敷设
-
低烟无卤阻燃型走线槽
低烟无卤阻燃型走线槽
-
PVC线槽的安装-综合布线
线槽安装时,应注意与强电线槽的隔离。布线系统应避免与强电线路在无屏蔽、距离小于20cm情况下平行走3米以上。如果无法避免,该段线槽需采取屏蔽隔离措施。进入家具的电缆管线由最近的吊顶线槽沿隔墙下到地面,并从地面镗槽埋管到家具隔断下。
-
线槽用PVC是什么材料
在塑料制品中,线槽的主要原料是PVC.
-
线槽规格
线槽规格,上海日成-RCCN,专业制造线槽,技术团队及丰富经验,提供PVC线槽、行线槽、配线槽在工业设计、机械设计等配电柜综合布线解决方案.专业服务于外资及国内品牌有线槽需求的企业,产品通过UL,CE,ROHS国际认证.
-
线槽种类
线槽在办公室的安装细节需要要注意的是线槽种类,包括的深度和宽度,因为尺寸不足也会让地面在放线管后不平,到时候只有返工。